Logitech has created the new Circle View Logitech circle inhttps://hufftime.com/stallation Doorbell, which gives you security and peace of mind by allowing you to see, hear and speak to whoever is at your door via your smart phone or computer anywhere in the world. The best part about the Logitech Circle Doorbell is that it requires no installation as it comes with its own built-in high definition camera and microphone; all you need to do to install it on your door frame is plug it in and turn it on.
Tools and Materials Needed
You will need a screwdriver and a drill. To start, you will want to make sure the doorbell is in an area that has an unobstructed view of the front door so it can see when someone comes up the path. Next, take off the protective plastic cover on the back of the doorbell by unscrewing it. Once removed, you’ll have access to three screws that are holding in place the interior plate; remove them with your screwdriver. After unscrewing those screws, you’ll need to pry apart some tabs and remove the plate so you can access four more screws that hold in place another plate; remove those as well and set them aside for now. Wire stripper. Logitech circle installation Circle View Doorbell. Electrical tape
Step-by-Step Installation Instructions
Unpack the Logitech Circle and find a suitable location for it. The ideal location is on a wall near the front door, but any location will work as long as it is within Wi-Fi range of the house. Avoid placing it too close to windows or in a room with lots of interference from other wireless devices like microwaves, cordless phones, or DECT phones. Mounting screws are included in the package and you can use them if you want to mount it on the wall (or ceiling). If not mounting, place in an out-of-the-way location that won’t get bumped often. Turn Circle around so the lens faces the entrance to your home and then wait for it to scan for new networks. It should only take about 20 seconds. On your phone, open up Circle App and tap Setup. Follow on-screen instructions to connect Circle’s Wife connection to router’s Wife connection. With Circle connected, follow on-screen instructions and plug in Ethernet cable between Circle’s Ethernet port located at the bottom of the device with modem/router.
Tips for a Successful Installation
Follow these steps for a successful Logitech circle installation. Download the app from the App Store or Google Play Store. Plug in your doorbell and wait for it to power up. Follow the instructions on the app’s welcome screen and press ‘Next’. Plug in an Ethernet cable from the outside of your house into your doorbell (don’t worry if you don’t have one). Press ‘Next’ again. This will test that the doorbell is connected to Wi-Fi. -Select yes when asked if you want to use both 2.4 GHz and 5 GHz WI-Fi networks.
FAQs
How does the doorbell work? The video footage from the doorbell is sent to the cloud, where it’s processed into a live and recorded video stream. This stream can be accessed from the Logitech app. If someone rings the bell, you’ll get a notification on your phone that shows what’s happening at your door and lets you talk through video with whoever is ringing. How do I set up my Circle View Doorbell? Will I need professional installation for my doorbells? How much does this cost? Does this offer any security benefits? 7What are other smart home products offered by Logitech that can complement my Circle View System?
